Log cabin garden room office wooden light architecture building made out of spruce hand made crafted 6 x 4m

Wall thickness: 44 mm 
Wall dimensions: (width x length) 6 x 4 m
Wall height 2366mm
Height to the ridge 2336 mm
Floor area 21.4 m²
Roof area 27.23 m² A roof slope of 4° corresponds to 7% Calculated load on the roof structure 150 kg/m²
Windows pcs. / Opening side check according to project drawings
Doors Piece / opening side check according to project drawings Glass used. Double insulated glass
Roof outlet Check according to design drawings
The external surface (walls) 55.6 m²
Internal surface (walls) 55.6 m²
Wood moisture level ~ 18%

Product set:
Waterproofing for the foundation under the foundations
Foundations for flat foundations
Floor board with tongue and groove from 18 mm
Skirting board kit - check the set of profiled wall boards according to the design drawings: 44 mm with tongue and groove tools
Roof board with a tongue and groove from 18 mm
Set of wooden finishing elements: roof faceplate, roof decoration, roof truss faceplate and ceiling trim.
Roof covering: bituminous felt in rolls.
Set of mounting hardware.
Sealing materials: tape for sealing doors, windows and corners from the inside; silicon for external corners and wall sealing.
Metal threshold for the front door.
A set of windows and doors with double glazing, internal wooden doors.
Opening from the outside of the window, check the side of the door opening according to project drawings.
Double rubber gasket to start protecting windows and doors against rain and wind and a set of locks and handles.
Check the deck board set according to the project drawings.

Installation recommendations:
Installation is to be carried out in accordance with the instructions.
All wooden elements must be installed immediately and after assembly cover with a layer of impregnation or paint. In this way you will get a beautiful wood surface for many years.